AU Compliant 1966-69 Corvair Front 3-Point Seat Belts

Each set comes with completely assembled driver and passenger side seat belts, two Australian-compliant female ends with a red push button (shown in second picture), Grade 8 bolts, and all other necessary installation hardware and instructions. 

Each pair of front 3-point seat belts will bolt into all existing factory holes in your 1966-69 Corvair. The brackets that bolt into the floor are made out of stainless steel and are e-coated black. The belts are sewn according to the vehicle manufacturer's pattern to increase their strength, and come in all of the colors shown in the color grid picture. Please note that even if a color is ordered, the floor brackets and clamshell covers will still be black. The reel covers may also be black as not all colors can be color-matched.

Our seat belt sets are pull-tested to 3,000 pounds of force weekly to ensure their quality and compliance with the Federal Motor Vehicle Safety Standards (FMVSS). However, our seat belts exceed this 3,000 pound standard by more than 20%. In addition, they are tested according to Australian AS2596 ADR4 E45 standards, and come with the required Australian compliant tags.

Using the drop-down menus, please confirm the year range of your Corvair, then select whether you have bench or bucket seats and your desired seat belt color. If the color you want is not listed, please choose "Other Special Color" and type the color name and/or color code into the "Special Instructions for Seller" box during checkout. Please refer to the color grid picture for this information.