1967 GTO Rear 3-Point Seat Belts

*PLEASE NOTE THAT THESE ONLY FIT HARDTOPS.

Each rear set comes with driver and passenger side seat belts, two stainless steel brackets, two female ends with your choice of buckle style, Grade 8 bolts, and all other necessary installation hardware and instructions. 

Each pair of rear 3-point seat belts will bolt into the existing holes of your 1967 GTO's structure - in the quarter panel/trunk area and under the rear shelf panel. The rear brackets will go around the speakers under the shelf without interference. The belts are sewn according to the vehicle manufacturer's pattern to increase their strength, and come in all of the colors shown in the color grid picture.

Our seat belts are pull-tested to 3,000 pounds of force weekly to ensure their quality and compliance with the Federal Motor Vehicle Safety Standards (FMVSS). However, our seat belts exceed this 3,000 pound standard by more than 20%.

Using the drop-down menus, please choose the buckle style you would like (all buckles shown in second picture), the desired seat belt color, and the type of reels you prefer. If the color you want is not listed, please choose "Other Special Color" and type the color name and/or color code into the "Special Instructions for Seller" box during checkout. Please refer to the color grid picture for this information.

If you choose the standard reels, they retract and lock up like modern car seat belts. However, if you choose ratcheting reels, they will ratchet back once pulled all the way out and will not loosen until the seat belt is fully retracted again. These are a premium option, and are perfect for car seats!